This listing is for a set of THREE:
- 1.5″x1.5″ solid aircraft aluminum tooling arms, 20″ long.
Please see full specs under ‘Features” tab below
Belt Grinder Tooling Arm for 2×72″ knife making grinder – 3 pack
$135.60
Description
3 Pack, Tooling arms for belt grinders that accept 1.5″ square arms.
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 11 × 11 × 5 in |
Features
3 Pack
This listing is for a set of THREE:
- 1.5″x1.5″ solid aircraft aluminum tooling arms, 20″ long.
- It has 2 threaded holes on the one side & 2 unthreaded holes on the side perpendicular to the threaded holes.
- The threaded holes are for attaching a D-shape backing plate, the unthreaded holes are for attaching a tool rest.-The front threaded hole is 1.34″ from its center to the front edge of the bar, it’s tapped 1/2-13 straight through the bar -The second threaded hole is 1.8125″ center to center behind the front threaded hole, it’s tapped 3/8-16 at least 1″ in, enough for the grab bolt -The front unthreaded hole is .66″ from its center to the front edge of the bar, it’s drilled 3/8″ straight through the bar -The second unthreaded hole is 1.7″ center to center behind the front hole, it’s drilled 3/8″ straight through the bar
We use these tooling arms on the high quality belt grinders that we manufacture. They work very well with our D-shaped flat platen backing plates & also our tool rests, listed elsewhere. The finish is industrial, we do not paint, polish or anodize these. You can polish them up with a buffing pad if you want a shiny look. Please also have a look at our other listings & search OriginBladeMaker on Youtube & Instagram for some other fun stuff.
